Sign in perhaps register 。

The third is color.Some customers are very strict about the color of the floor and must maintain the same color difference.But this provision is unscientific.Because the wood is affected by the sun, raw material parts, growth and development parts and lower sawing points, it will inevitably cause inconsistent color difference.SPC floor has a thickness of mm-mm, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation.Hula,The significance of brand is not only the popularity of the enterprise.A mature and successful brand is not strong and well-known in the end but forms a solid psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers, which is bred in the minds of consumers by many factors, such as the accumulation of time, the actual actions of enterprises, the continuous improvement of products and services and so on.Enterprise brand is the commitment and attitude of enterprises and the guarantee of consumers.Therefore, when choosing products, consumers had better choose big brands in order to obtain better quality and service assurance. Exposure to obvious sunlight, or significant increase or decrease in room temperature, which should be minimized.Florida,Fourth, wear resistance means that it is not easy to scratch with artifact.How to lay lacquer cloth?The construction procedures and methods are as follows: first, measure the structural size of the room accurately;Then cut the lacquer cloth according to the size.Note that the cutting width should be slightly larger than the required width to facilitate overlapping, matching and trimming during paving.The cut floor paint cloth shall be placed at room temperature of no less than ℃ for about hours so that the crimped part of the floor paint cloth can be fully extended and ready for the final paving.Special adhesive shall be used for paving the floor paint cloth.Before paving,HulaDell laminate flooring, the indoor ground shall be treated first.The laminate floor is composed of wear-resistant layer, decorative layer base material and balance layer.The wear-resistant layer, and the base material is made of fast-growing forest materials. The cost is lower than that of solid wood flooring. At the same time, it can be produced on a large scale, and the relative cost performance is high.Due to the different base materials, the price difference is obvious, and there is more room for customers to choose, which is suitable for people at all levels.

The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.The reinforced composite floor with good base material will give off a fresh wooden smell. The composite floor with weak base material will produce a strong pungent smell. The author randomly picked up two wooden floors and put them in front of his nose. The pungent smell from one wooden floor made the author frown immediately. Customers may wish to smell the floor closely when purchasing, and do not buy inferior floors.Seventh, sound insulation and noise reduction.Excellent service, All standard SPC floors must be certified by IS international quality management system and ISO international green environmental protection product certification.First, look at environmental protectionCompared with laminate flooring: pattern non laminate flooring.Comparison with solid wood flooring: strong glue must be selected for the production of solid wood composite flooring. Unlike the traditional solid wood flooring, only the wood itself is basically with glue.Although the environmental protection quality of super glue is very high, and the formaldehyde concentration can be basically ignored it still exists.

Floor leather (also known as coiled floor), a new type of flooring material, belongs to plastic products. It is one of the indispensable floor materials for modern room decoration. It has a thickness of more than mm and a wear-resistant layer of more than . Generally, glass wire with good flatness or double primer is used.Plastic floor leather belongs to soft floor. It is a floor roll produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.Advantages of floor leatherWhere is good,In fact, it is very simple to prevent wood floor cracking. Usually, do a good job in floor maintenance and humidification of wood floor in areas with low average moisture content, which can be effectively prevented, or raise flowers and fish at home, and put buckets in the corner of the room.Generally speaking, most of the strengthened solid wood composite floors are up to standard commodities within the scope of standardized formaldehyde emission.According to relevant requirements,HulaWhich is cheaper, wooden floor or floor tile, the formaldehyde emission of commodities in the room shall be class E, i.e. ≤ mg/l. Select water resistance.Fourth, it is mainly the veneer thickness (decorative board thickness). The multi-layer solid wood floor has , and the new three-layer solid wood floor has , to ,HulaWood floor grinder, mm.Hula,Laminate flooring is a product with high scientific and technological content. From the appearance, we recommend that consumers buy brand products.Well known brands generally pass the test of market operation and have established a good image in the eyes of consumers.Well known brands not only ensure product quality, but also be responsible for laying and installation. More importantly, in the future, the service is guaranteed. If you buy it at ease, but its utility and service life may be only / or less of the brand floor, and there is a lack of environmental protection and after-sales service guarantee. Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement, etcThe current woodworking is basically done by woodworkers. The 'general woodworking' method is adopted, and the shrinkage joint size is not calculated according to the thermal expansion and cold contraction parameters provided by SPC flooring factory.If the room is slightly larger, but the reserved gap is too small, especially when the temperature difference between winter and summer is too large, it is very easy to have no gap to expand, resulting in arching and warping.