Sign in perhaps register 。

The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles,RonneHow to solve the creak on the wooden floor,RonneSpecifications and dimensions of wood floor, use a syringe to insert and suck out the air and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth. Ultra light and ultra-thin, SPC floor has a thickness of about mm-mm and light weight, which is less than % of ordinary ground materials. It has incomparable advantages in stair bearing and space saving in high-rise buildings. At the same time, it has special advantages in the reconstruction of old buildings.Ronne,Solid wood composite floor and reinforced composite floor are paved by dealers at this stage.In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.Masvingo,Wood plastic flooring manufacturer.jpgSixth, his specifications and dimensions are also related to his total price.Improve the sense of hierarchy, reliability and cost performance of the floor. Why don&#;t the community owners choose the solid wood floor?

Laminate flooring has rich colors and patterns, which fully meet the needs of personalized design. There are many varieties of designs and colors, and the designs and colors are fashionable. It can simulate all kinds of natural or man-made patterns.The decorative layer of laminate floor is generally imitated by computer, which can simulate the wood patterns of all kinds of materials, and even imitate stone and create unique patterns that are not found in nature.Solid wood laminate flooring is the same as laminate flooring. As long as it is leveled, because the installation requirements are simple, it also greatly reduces the hidden dangers caused by installation. It has bright colors, clear lines and pleasing colors.When selecting accessories, we should also consider the cost. We should select thin or narrow right angles and strips, which virtually limits the shrinkage space and causes unnecessary losses.Free consultation,Good flooring should choose good materials, good materials should be natural, the better. In fact, it is not. If the density is too high, its water absorption and expansion rate is also high, which is easy to cause size change and lead to floor deformation.Secondly, we should rely on advanced flooring production lines and equipment and rigorous technology to produce first-class flooring.Judging the quality of the floor can also be measured from the quality inspection certificate and other honorary certificates such as 'national quality inspection free products', 'ISO quality system certification', 'ISO environmental system certification' because the acquisition of these honors must refine the results of an enterprise&#;s operation.The surface layer of laminate floor is a wear-resistant layer, which is composed of evenly distributed aluminum oxide, which can achieve high hardness. Scraping with sharp hard objects such as keys can only leave very shallow traces.The pollution resistance, corrosion resistance, compression resistance and impact resistance of laminate flooring are better than other kinds of wood flooring. The room is small or the light is not very good. Pay attention to the selection of light color flooring. Light color flooring can make the small room look larger.A large room with good light can have thick or thin floors.

Well known brands: LG and Hanhua flooring in Korea Armstrong flooring in the United States, Jiefu and Tejia flooring in France, fulbo flooring in Sweden, longxilu, tahilong, Dongli flooring in Japan, and domestic bonier flooring.For the pursuit of cost performance, choose Korean brands, Japanese brands for the pursuit of quality European and American brands for the pursuit of brand effect, and domestic brands for low prices.Project scope,As mentioned above, calcium powder has good thermal conductivity, so paving the floor at home is the best choice. Even if it gets hot, it will not release harmful gases.SPC floor is a new type of floor, also known as stone plastic floor. Its base material is a composite plate made of stone powder and thermoplastic polymer, which is stirred evenly and extruded at high temperature. At the same time,RonneSPC flooring manufacturer, it has the characteristics of wood and plastic to ensure the strength and toughness of the floor. SPC floor has strong impact resistance, it is flame retardant but it can&#;t be burned.Ronne,Melamine surface coating is generally used for wallboard, tabletop board, etc. it is used in places with low wear resistance requirements. In the flooring industry, this kind of surface coated floor is called 'false floor'Its wear-resistant revolution is only - revolutions. If it is used with high strength, the decorative paper on the surface will wear out after two or three months. The standard laminate floor will not have such a problem after years of normal use. There is no wear-resistant layer on this kind of floor decorative paper, the pattern is beautiful and clear, and it is relatively smooth when touched by hand, which is the place where laymen are easy to be fooled.sound insulation Ultra light and ultra-thin