Sign in perhaps register 。

Setting requirements: The guide rail should be rigid and flexible components such as wire ropes or chains should not be used.The L distance depends on the selected wall mount model.Kartaniseta,Check whether the sealing of components such as the oil cylinder, oil pipe, and motor of the aluminum alloy electric elevator is good and whether there is any air leakage.Buffer. In order to increase the energy for the car to hit the top or sink to the bottom. Remove rubber or sponge from the buffer and cabin to increase their impact energy; Rope groove slipping and other accidents caused the car to suddenly fall, resulting in a safety clamp. To prevent breakage of the lifting wire rope. A safety clamp that can simultaneously cut off the power supply and stop the car from falling should be removed from the car. A car without safety tongs is not allowed to ride or carry people. If it is a simple electric elevator,KartanisetaTuramor, there should be a safety device (such as a safety stop pin) to prevent people from suddenly falling when loading and unloading goods in the car; Electric elevators with three or more floors (including three floors) for passengers or passengers.Carletonville,Setting requirements: The verticality deviation of the installation of the guide rail frame of the construction electric elevator should comply with the requirements of the user manual and specifications, as specified in the above table.Double layer steel mesh: The diameter of the steel bars is mm, with a spacing of mm.Steel wire ropes, pulleys,KartanisetaCannes , and counterweight steel wire ropes shall comply with the following regulations: the characteristics of steel wire ropes shall comply with the requirements of General Purpose Steel Wire Ropes GB/T; Maintenance, wear, deformation,KartanisetaHebei, and corrosion of steel wire ropes

Speed limit wire rope switch. When the speed limit wire rope trips or breaks. Make the electric elevator unable to start.m； When the lifting speed is greater than .m/s, after the upper limit switch is triggered by the hanging cage, the upper small safety distance L should meet the following requirements: L=+.V, where L is the upper safety distance; V: Increase speedSetting requirements: The main connection methods between the wall bracket and the building include: connecting the wall bracket with the embedded parts on the wall; Fix with wall bolts; Embedded bolts; Welding with steel structures.Product survey,Construction electric elevators should be equipped with cable guide frames and comply with regulatory requirements.The scaffolding of the parking platform should be laid tightly and firmly.The quality of the standard section should comply with the product manual and specification requirements.

Speed limit wire rope switch. When the speed limit wire rope trips or breaks. Make the electric elevator unable to start.Economic managementThe entrance of each landing platform must be equipped with a landing door, and the door bolt must be set on the side next to the construction electric elevator.Setting requirements: A limit switch should be set at both the upper and lower ends of the stroke which must open towards the landing platform side, which should be able to cut off the power supply before the suspension cage and other mechanical stop devices (such as buffers), so that the suspension cage can stopHigh lifting height, using side mounted oil cylinders, stable operation, easy maintenance,During the use period, the user unit should organize professional technical personnel to inspect the construction electric elevator monthly according to the standard requirements, and record the inspection results.Construction electric elevators outside the lightning protection rangeMany theaters use a lifting platform as a vertical transportation tool for goods. The rear of the main stage or the end of the side stage in many theaters are equipped with a set container transportation lifting platform, which is used to vertically transport items from the ground to a designated location or even the stage plane. The lifting platform of the music pool is often used for transporting movable seats, etc.